Le test comprend 80 questions aléatoires.
Total de questions sur ce sujet : 132
For a ships loading computer to be safely used for loading planning and stress calculations, it must be approved by:
A Classification Society.
IT Department of Ship owner.
The Port State where vessel is currently loading.
Hull and Machinery Insures of the vessel.
Why does a ship with ahead or astern speed, have a small lateral or sideways movement when turning?
The hydrodynamics of the hull cause a drift angle to be produced, which is not in the fore and aft line of the vessel.
The ship moves laterally because of all the external forces on the vessel hull caused by the environment and possibly a tug.
The ship moves laterally because it has a single hull.
Because the rudder is positioned at the stern of the vessel.
A vessel has lost several containers overboard during a voyage. Upon arrival into port, she is being inspected by the attending surveyors. The most important item to be checked during this inspection would be:
Certificates of approval related to lashing equipment used to secure those containers.
The vessel’s Class certificate.
The on-board cargo lashing inventory.
The vessel’s Safety Construction certificate.
During an audit, adherence to the company cargo handling proceudres can best be demonstrated:
By being able to provide comprehensive and verifiable documentary records of cargo operations.
By requesting that an audit takes place during cargo operations.
By providing a summary of out-turn figures for the auditor.
By providing a summary of incident and lost time figures for the auditor that reflects a successful and trouble-free system on board.
What general background colour is used on warning signs that indicate emergency or first-aid features, or indicate a safe condition?
As per the IMDG Code, an “article” is referred to as:
Something that is packed within a freight container.
A device that is responsible for initiating a dangerous reaction.
A device that contains a dangerous substance or mixture of substances.
A form that contains important information about a hazardous.
A “Fantainer” is used for:
Carrying dry cargoes prone to condensation.
Carrying dangerous goods prone to condensation.
Carrying reefer cargoes prone to condensation.
What is the normal name of the waterproof suit shown in the picture?
When acting as helmsman would you expect the reading of the gyro compass to be the same as the magnetic compass?
They would never be the same.
They would always be within 1 or 2 degrees of each other.
Very seldom would they be the same.
They would always be the same.
Who is the leader of the lifeboat drill (abandon ship drill)?
The first member of the crew arriving at the survival craft.
The appointed lifeboat commander.
The term OSHA stands for:
Occupation and Safe Health Association.
Occupation Safety and Health Aids.
Overseas Sea Hazard Association.
Occupational Safety and Health Administration.
An inspection in the amidships area of the weather deck of a Panamax container vessel has revealed cracks in the hatch coamings. It is extremely important to urgently inspect the:
Longitudinals in the double bottom tanks in the amidships half length of the vessel.
Transverse bulkhead immediately aft of the engine room.
Stiffening in the forepeak tank at approximately water line level.
Transverse bulkhead beneath the bridge front.
What type of search pattern is recommended in the IAMSAR Manual as most effective for a single vessel, when the location of the search object is known within relatively close limits?
It is the Master’s responsibility to ensure that:
Concerned personnel carry out the on-board training programme effectively.
All information regarding the onboard training is given to the ship manager.
Safety equipment is not used during the training.
Life jackets are worn during every training.
In the diagram, the depth of water under the keel is indicated by the letter “C”. Which bridge instrument would indicate this depth?
The dangers associated with carriage of empty tank containers is that:
They may contain flammable cargo residue.
They could explode if their vents are closed.
They may not be declared as being empty.
They are prone to collapse.
Master of every ship must provide:
Facilities to conduct training whenever required by the training officer.
Proper rest to the crew after each training programme.
The training during crews working hours only.
A link between the shipboard training officer and the company training officer ashore.
As a minimum, how often shall life boats be launched with their assigned operating crew aboard and manoeuvred in the water according to SOLAS?
A hand flare must have a burning period of at least:
Exposure to moderate concentrations of ammonia may cause:
Chocking and possible loss of eyesight.
You are a Senior Officer of the Watch on vessel “A” and are passing through the Straits of Gibraltar. The vessel’s speed is 18 knots and your vessel is overtakiing several other vessels, when the visibility reduces down to about 2 nm. What aspects would you consider when establishing a “safe speed” for your vessel?
Deciding safe speed consider: 2 miles visibility; traffic density; manoeuvrability of vessel; effectiveness of navigational equipment (ARPA etc.); state of sea and currents and navigational hazards.
Adjust my track to follow Route 1 or 2 illustrated and reduce speed down to half speed, approximately 8 knots.
Safe speed should be where the vessel can come to a stop within the visible range.
A safe speed is where a vessel can take proper and effective action to avoid collision and be stopped within an appropriate distance.
The Code of Safe Practice for Cargo Stowage and Securing was prepared to give guidance for:
Securing of deck cargoes.
Port State Control Officers when carrying out ship inspections.
Securing of cargoes in hazardous ocean areas.
Preparation and content of the Cargo Securing Manual.
Which statement best describes how land moves, if at all, on an ECDIS set in North-up, relative-motion mode?
Land on the chart screen moves relative to the ship symbol.
The land is always in the middle of the screen.
Land is stopped with the vessel symbol moving across the sea floor.
This is a feature only seen on radar displays.
Read the text and answer this question: What should be given to prospective seafarers? “It is recommended that every prospective seafarer should before being employed in a sea-going ship, receive proper training in personal survival techniques. In respect of such training several recommendations are made”.
Approved training in survival technique.
Survival and protective clothing.
The figure shows the cross section of a ship floating in water with the hull coloured in red and the seabed below the vessel shaded. On this figure there are four (4) possible definitions of the term “UNDERKEEL CLEARANCE” given. Which one is the correct one?
Underkeel clearance is B.
Underkeel clearance is C.
Underkeel clearance is D.
Underkeel clearance is A.
As per IMDG Code, fishmeal not treated with anti-oxidant, would be carried on a container vessel under:
Class 4.2 – Flammable solid.
Class 4.1 – Flammable solid.
Class 9 – Miscellaneous dangerous substances and articles.
Class 5.1 – Oxidizing substance.
On a ship involved in a collision, what should happen immediately after the accident has taken place?
The bridge team should devise a plan of action.
The other ship should be contacted.
Crew should follow an emergency procedure.
The master should be called.
Carriage of wet scrap steel borings, turnings and swarf in containers is generally considered dangerous, because:
It can spontaneously ignite.
The moisture will cause a huge increase in the weight of the cargo.
The cargo will not dry out en route enroute.
This type of cargo will corrode the container.
What is the meaning of the term “Make Fast”, when mooring the ship?
Make Fast means to act very quickly.
Make Fast means secure the ropes to the bits.
Make Fast means to to avoid eating all meals during the daylight hours.
Make Fast means to coil up a rope.
The International Maritime Bureau Piracy Reporting Centre attributes the increased numbers of hijacking to:
Higher crime rates around the world.
The greater involvement in piracy of well-organized and armed crime networks.
Easy access to military weapons.
The correct weight of a wrongly declared container may be best indicated by:
Strain gauges fitted to the shore gantry cranes.
The ship’s loading computer.
The tare weight stamped on the container.
According to Rule 24 of the International Regulations for Preventing Collisions and the illustrated lights, how long is the tow likely to be?
It is more than 50 metres but less than 200 metres.
It is less than 200 metres.
When a vessel is undertaking a long canal transit with locks and lots of activity, what management issues should the Master consider?
Lack of sleep and fatigue of bridge officers.
Fully manned engine room throughout the canal transit.
Suitable crew available for lock transits.
The most dangerous consequence of the corrosion and wear down of container stools on weather deck/hatch tops of a container vessel would be:
Collapse of the deck stool, leading to lashings becoming slack.
Twist locks not being able to be fully closed.
Twist locks not being able to be removed after discharge.
Uneven loading of the container on the deck.
On a Container vessel, duty crew members must supervise the lashing of containers, because:
It is an international requirement under the ISM Code.
Because of local port regulations.
Stevedores often apply container lashings haphazardly or place twistlocks incorrectly.
Because of time constraints on the vessel towards the end of cargo operations.
What is understood by the term “Boat Drill”?
“Boat Drill” means the practical training in the various aspects of getting all the people onboard safely off the ship, in the event of abandoning ship.
“Boat Drill” is an exercise to launch the lifeboats and move the boats clear of the ship.
“Boat Drill” is an exercise in the practical and safe methods to secure a boat alongside the ship.
“Boat Drill” means an exercise in the safe methods of handling a lifeboat in heavy seas.
With respect to the ISM, what training in addition to lifeboat and fire drills must be carried out?
Familiarization, and other drills identified as necessary by the ship.
The boat drill and fire drill should be adequate to meet your needs.
Which organization verifies the computational results and stored ship data used by the stability program loaded on a vessel’s computer?
The Classification Society.
The engineer attending the installation and initial on-site testing.
A lead battery of 200 Ah, in accordance with the DIN-standard, must be able to supply:
6 ampere during 20 hours.
1 ampere during 200 hours.
10 ampere during 20 hours.
200 ampere during 1 hours.
A person wearing an adult lifejacket shall be able:
To dive half a meter under the water surface.
To jump from any height into the water without being injured or damaging the lifejacket.
To swim a short distance through the water and board a survival craft.
To swim half a mile distance and board a survival craft.
Which part of the float-free arrangement for inflatable liferafts is made to release the liferaft after being automatically inflated during the ship is sinking?
The hydrostatic release unit.
Under what convention is the master to ensure that a ship is seaworthy and in a fit state to safely carry a shipper’s cargo?
Which of the following requirements regarding life-buoys correspond to present regulations? (SOLAS III/7.1).
Not less than half the total number of lifebuoys shall be provided with self-ignighting lights.
All the life-buoys shall be placed in holders with quick-release arrangement.
At least four life-buoys on each side of the ship shall be fitted with buoyant lifelines.
At least one lifebuoy with self-activating smoke shall be placed within the vicinity of the stern.
Notification logging procedures (OPA-90):
Every report or message must be logged including time and date.
Only verbal reports for documentation.
Only initial reports to be logged.
Only communication with USCG.
The function of a lashing plate on a container vessel is:
As tie down point for turnbuckles on deck or hatch cover.
A means of securing buttresses under-deck.
A means of securing the hatch covers.
A means of securing lashing chains.
How much food per person is supplied on a liferaft?
None, only barley sugar sweets supplied.
On board a container vessel conducting loading operations in United States, you notice an unsafe stevedore working practice. If you do not correct this immediately, it may result in:
The ship will be prosecuted.
The master will be arrested.
The port will lodge a protest against the ship.
The duty officer will be arrested.
Where several rescue units are engaged in a search and rescue operation, one of them may be designated as the On-Scene Coordinator (OSC). Which of the following describes how this appointment will be made?
The OSC will always be designated by the Search and Rescue Mission Coordinator.
The coastguard will appoint the OSC using their vessel database to assess suitability.
The role of OSC is only taken by a naval ship close to the area.
An aircraft is usually appointed as the OSC because of their speed.
During restricted visibility, you are posted as bridge lookout and you hear 1 long blast at intervals of about 2 minutes on your port bow. What will you report to the OOW (officer on watch)?
Power driven vessel under way and making way on the port bow.
A vessel at anchor on port bow.
Fog signal of one long blast heard on the port bow at regular intervals of about 2 minutes.
Power-driven vessel making no way on port bow.
On a Container vessel, a mid-bay guide is positioned:
On the tank top at the ends of 40′ container bays.
Between 20′ container bays on deck.
On the tank top mid-way in 40′ guides to prevent transverse movement of 20′ containers.
At the base of cell guides.
On a Container vessel, the purpose of fixed stacking cones is:
To prevent horizontal movement of 20′ containers in 40′ cell guides.
To prevent the horizontal movement of 40′ containers at tank top level.
To prevent movement of 20′ and 40′ containers at deck level.
To prevent the horizontal movement of 20′ containers at tank top level.
What is the signal actuated by a detection system?
A visual and audible alarm signal at the control panel.
A visual signal at the control panel.
An audible and visual signal consisting in 7 short signals followed by a long one.
An audible signal at the control panel.
Code signals concerning requests and general information on medical matters normally consist of:
Letter D plus two other letters.
Letter M plus two other letters.
Letter P plus two other letters.
Letter H plus two other letters.
What does heaving result in?
Vertical accelerations acting along container corner posts.
Shearing of container twistlocks.
Longitudinal accelerations acting on hatch pontoons.
What kind of safety clothing should be worn during a mooring operation?
No particular safety clothes are required.
Safety shoes and boiler suit.
Helmet, safety shoes, gloves and protective clothes.
The correct functioning of a DSC-modem can be checked by means of:
The built-in test facility in the modem.
Tester provided with the equipment.
The testing-mode of the ever present VHF-DSC-EPIRB.
The obligatory monthly transmission from the RCC’s.
Which of the following is false when a casualty is bleeding?
Cover the wound with a cloth.
Encourage patient to lie quite and re-assure.
A vessel has been in involved in a collision. Which procedure should happen immediately?
Communicate with the other ship.
There is assessment of the damage stability.
Determine is there is any evidence of pollution.
Determine any injuries of persons on board.
What is the daytime signal to be shown when the vessel is at anchor?
A black ball forward where it can best be seen.
A black diamond forward where it can best be seen.
Two black balls where they can best be seen.
The national flag flying from the fore mast.
On a Container vessel, containers with untreated fishmeal cargo are carried:
Separated from class 4.2 containers.
On deck away from sunlight.
On a Container vessel, under which IMDG Class is fishmeal normally carried when treated with anti-oxidant?
Class 9 – Miscellaneous dangerous substances and articles.
Class 4.1 – Flammable solid.
Class 4.2 – Flammable solid.
Class 5.1 – Oxidizing substance.
Which one of the following types of rope is the most dangerous to work with?
What is usually the effect on G when the ship is damaged below the waterline, with water ingress?
It first rises then lowers.
On a Container vessel, containers containing marine pollutants are stowed:
In the last container bay on deck.
Anywhere on deck at the extremity of a container stow.
In the foremost container bay on deck.
As a result of being in collision with your vessel, the other vessel involved is on fire? What are your responsibilities to it?
The other vessel is in distress and if possible I will render assistance.
You should continue on with the voyage if your damage is not serious.
There is no statutory requirement to provide assistance as the actions of that vessel were the primary cause of the collision.
Your vessel should manoeuvre close to the other vessel and aid the fire fighting operation.
The vessel is 20 miles off the coast and disabled because of engine failure, which will require at least 24 hours to repair. What initial actions should be taken to ensure the safety of the vessel?
Steer away from danger until the vessel looses way, then if possible drop the anchor.
Display NUC lights and inform the nearest Coast Guard of you predicament.
The number of frequencies on which a MF/HF-DSC distress alert multi-frequency call attempt can be transmitted is:
Which Security Levels requires the highest security alert?
What do you understand by the term “Risk Assessment”, and how would this be carried out on board?
Identify the hazards, quantify the risks, put control measures in place, monitor the work activity and review.
States than when work has a degree of risk that the work is not carried out.
Identify the hazards and specify the personal protective equipment that would be required to complete the work.
Requires a great deal of preparation and involves recording everything on paper.
Where is “AFT” in the figure?
All heat burns should be:
Cooled as quickly as possible with running cold water for at least 10 minutes.
Covered with Gauze or bandage immediately.
Applied with soothing lotion as soon as possible.
Treated by the doctor only.
As per SOLAS regulations, the general emergency alarm system must be tested:
What must be done if the Oil Discharge Monitoring Equipment (ODME) should fail during a ballast voyage?
All of the mentioned must be performed.
The failure must be repaired.
The failure must be noted in the Oil Record Book.
If the failure cannot be repaired onboard, the ODME must be repaired before the ship commences its next voyage.
In which one of the following an oil, the flash point of which only needs to be over 43 °C, may be used?
What does the term DISCHARGE mean, as used in the Oil Pollution Regulations?
All the other alternatives.
If requested by a costal radio station to participate in a rescue operation, what is the most important information you may give?
Your vessel’s position, name, call sign and speed.
Your vessel’s destination.
Your vessel’s own cargo owner.
How are ship’s stability characteristics affected by Parametric Rolling?
By the constant change of underwater hull geometry as waves travel past the ship.
By the development of a negative GM.
By the virtual loss of GM.
By an increase in the angle of pitch.
How will you act if you are helmsman and the OOW (Officer on Watch) gives you the order: “Nothing to port”?
Let the ship turn to starboard.
Alter course to starboard.
Don’t let the ship turn to port.
Port State Control Officers are authorised to:
Detain ships that are not meeting the requirements for a minimum of 30 days.
Regularly inspect ships known to meet the requirement.
Sign oil record book entries.
Inspect and detain ship that are not meeting the requirements until they are able to demonstrate compliance with the regulations.
A container vessel’s hatch pontoon quick acting cleat will need to be replaced:
When the rubber washer is compressed and hardened.
When the cleat has sprung open at sea.
When the cleat retainer is rusty.
When the cleat retainer is distorted.